FRIGOSCANDIA SPIRAL FREEZER

Frigoscandia – Model S -4212.25-RR-HAF (2005)

Frigoscandia SuperTRAK Sprial Freezer Model S-4212.25 -RR-HAF

SPECIFICATION

Configuration: V shaped angle outfeed

No of drums:1 only drum

No Tiers/ drum : 12.25

Effective belt length 1006 mm

Belt length in spiral 18.08 m

Belt Type: s/s, 1″ x 1″ heavy duty flat wire

Belt infeed height: 940 mm

Belt outfeed height: 160 mm

Overall size: 10.5 m L x 9 m w x 4.8 m h

PRODUCT SPECIFICATION

Was used for cooling Ice cream in 2 litre tubs (130% over run)

Product size: 190 x 120 x 88 mm

Capacity: upto 1,400 kg/hr

Retention time: 60 – 300 minutes

Max infeed: -5 deg C

Outfeed : – 18 deg C

ELECTRICAL

– 415 volts / 50 Hz

Control system – Allen bradley 2711P-B6C20D

VSD Main Drum drive: Telemecanique ALTIVAR 31

VSD Take up drive: Telemecanique ALTIVAR 31

Interface relays: Omron

Circuit breakers: Merlin gerin

PLC Unit: Allen Bradley 1769-28BXB

FANS

Evaporator (4) Fantech -1250 Alum wheel, Axial fan, Teco 11kW motor

Air balance fan: Fantech AP0502

MAIN DRIVE SYSTEM

Gearbox: Brevini NZ SC6006/MP1/10400

Motor: Teco 3 kW

BELT WASHER

Water pump

Motor: teco 0.9kW

Type: Lowara USA

Model: GMPBCEA-120/5

Drier system

Fan motor: Teco 3 kW

Fan: Mechanovent,

Cold/Hot water conn: 3/4″ BSP

Hot water requirements: 100 l/min @ 20 deg C

 

EVAPORATOR

Frigid Coil USA Model: S245, 100″ x 190″ x 8 rows VF-2R @ 1 FPI,

2R @ 2 FPI, 4R @4 FPI, 282 kW @6.7 deg C TD & -40 deg C ST, R717 Pumped 5:1.

 

WATER DEFROST

600 litres/ min @ min 20 deg C at 1 bar

 

REFRIGERATION REQUIREMENTS (NOT INCLUDED)

Suction temp: -40 deg C

Capacity req: 180 kW

Refrigerant : R 717

Evap feed system: Pumped

Located In Auckland, New Zealand

Call us on 01249 735987 or make an online enquiry below